NetBorder Carrier SBC

Sangoma Carrier SBC 1U

  • Front Panel Reset/Power button is used for:
    • Factory Reset
      • Press 1 time per second until system beeps and reboots (approx.: 10sec).
      • A beep will sound to indicate that system has completed factory reset
        before system reboots.
    • Soft Reboot
      • Press 1 time every 3 seconds until system reboots. (approx.: 6sec)
      • There will be no beep on reboot.
    • Power on/off
      • Hold for 10 seconds
    • Nothing will happen if pressed once
      • To avoid accidental restart.
      • Caution: From SBC SW release 5.0
    • Refer to Factory Reset section.
  • USB Ports can be used for Serial Console
    • Refer to Serial Console section.
  • RAID1 SSD
    • The RAID1 is NOT Hot Plug
    • SBC appliances use industrial grade SSD
    • One must power down the machine in order to change SSD/HDD
    • Contact Sangoma Support for part replacement.

Need more help with this?
Don’t hesitate to contact us here.

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.